Staple Cutting Machines

MAURER’s cutting machine is suitable for cutting endless yarn material, especially cellulose yarns, in equal staple lengths.

 

The cable is led by means of an injector by a water jet in a nozzle, which is adjusted exactly in the level of the grinding ring.

 

The rotating knives cut the standing out cables like scissors.

 

By these scissors cut it will be achieved that all fibers are cut smoothly, whereby an excellent equal staple diagram is reached.

As the fibers cannot withdraw, too long fibers can practically be avoided.

 

The one-sided machine is a unit with two cutting heads, one in operation and one as stand-by.

 

The staple fibre cable can be taken up directly from the stretching unit without the necessity of any holding device.

The cable is drawn by the driven roller towards the cutting head, from where it is transported by means of the injector to the cutting device.

The cut staple falls into the float off box and proceeds to the aftertreatment m/c.

The drive of the main roller and the cutting discs is made by a parallel shaft helical geared motor.

The continuously revolution regulation per motor is made by a frequency converter.

For simple and quick service works, the cutting head cover can be put transverse upwards by means of a pneumatic cylinder.

 

Typical MAURER cutting machine types :

 

Type

PSC

MSC1

MSC2

MSC3

Capacity

to suit inquiry

≤6 Million dtex

≤12 Million dtex

≤15 Million dtex

Staple lenght

25-105 m/min

25-105 m/min

25-105 m/min

25-105 m/min

Tow speed

20 – 400 m/min

20 – 100 m/min

(for viscose)

20 – 100 m/min

(for viscose)

20 – 85 m/min

(for viscose)

Nos. Knives

2 / 3 / 6

2 / 3 / 6

2 / 3 / 6

2 / 3 / 6

Dimensions

PSC

MSC1

MSC2

MSC3

Lenght

1,00 m

3,60 m

4,00 m

3,90 m

Width

1,00 m

1,65 m

1,80 m

1,60 m

Height

2,60 m

4,00 m

4,20 m

4,30 m

Weight

1,00 ton

5,00 tons

5,50 tons

5,50 tons

 

© Ing. A. Maurer S.A.

 

 

 

 

  • Terms of Use
  •  

     

  • Privacy Policy
  •